21
ADVANCED SETTINGS
"IMPLEMENT"
*
Fig. 73
Fig. 74
• Implement rear view
- Confirm by pressing
OK
to enter setup.
- Enter the value.
*
Implement width
Implement width
Boom width
(sprayed area)
14.00 m
20.00 m
Fig. 75
The width set for the implement is shown on the display in the guidance screen: usually it is
equal to the boom width, and thus to the covered area diagram.
If you wish to see two different widths displayed on the guidance screen, as in the example
of Fig. 75, set the
Implement width
to a different value than the boom width (par. 10.1.1).
END 10.1.4 Towed implement geometry settings (SYSTEM WITH TOWING HITCH)
> > > 10.1.4 Towed implement geometry settings (SYSTEM WITH TOWING HITCH)
Par.
Exit the function
or data change
Confirm access
or data change
Scroll
(LEFT /
RIGHT)
Delete
selected
character
Data
increase /
decrease
Scroll
(UP /
DOWN)
Enter
selected
character
