APV ISOBUS M2, Руководство по эксплуатации

Страница: 39 / 56

39
7.1.2.2 TASK CONTROLLER MENU FOR TOWED IMPLEMENTS
Figure 34
Description of the display elements
Here, the horizontal distances (AI and AII) from the
reference point of the tractor to the trailer axle and
the horizontal distance (B) from the reference point
of the tractor to the seeding rail are entered.
The reference point for a trailed implement is the
centre point of the clevis pin for a clevis hitch and
the centre point of the ball head or the lower link for
a ball-head hitch.
7.2 SPREADING OF ONE SEED TYPE
If "1" is selected for the "Number of seed types to be spread" display element in the Basic settings menu,
one seed type can be configured in the Work menu. Both seeding shafts are shown, which can be switched
on and off separately.
Likewise, both sections can be individually switched on and off via the Task Controller. Information on the
Task Controller menu can be found under Point 6.3.6.
7.2.1 CALIBRATION MENU
For the calibration test, two working widths (each section individually) must be entered. They are
automatically added together, resulting in a total working width.