APV ISOBUS M2, Руководство по эксплуатации

Страница: 38 / 56

38
With this button, the information, fan, and 100% buttons are shown. When it is pressed
again, the display goes back to the screen shown in Figure 32.
With the 100 % button, the spread rates for both seeding shafts can be set back to the
value determined during the calibration test. (If both seed types have the same working
width)
7.1.2 TASK CONTROLLER MENU
The Task Controller menu is described under Point 6.3.6. For the PS TWIN implement type, this menu
was extended. Under this point, only the changed buttons and their functions are described.
7.1.2.1 TASK CONTROLLER MENU FOR MOUNTED IMPLEMENTS
Figure 33
Description of the display elements
Here, the horizontal distances (AI and AII) from the reference point
of the tractor to the seeding rails are entered.
The reference point for a rigid mounted implement is the centre point
of the lower link hooks.