APV ISOBUS M2, Руководство по эксплуатации

Страница: 9 / 56

9
Selection of the seeding shaft motor or the pump (installed in LF600) and its number of
pulses per revolution. For the PS TWIN implement type, a second motor can be
selected.
Note: when selecting the implement type and the seeding shaft motor, the default
values are automatically displayed.
The following default values are stored:

P8 motor (installed in PS120
– PS500, PS TWIN): 378

P17 motor (installed in PS800
– PS1600): 1024

Pump (installed in LF600): 400
Selection of the number of seed types to be spread for the PS TWIN implement type:

one seed type (with part-width section function)

two seed types (across the same working width)
Selection of the existing PS fan. The following selections are available: electric fan,
electric fan PLUS, hydraulic/external fan or no fan (OFF).
When using a hydraulic fan, you must select whether a sensor is installed on the PS for
fan monitoring (speed sensor).
Setting whether a calibration button is installed on the implement (available as an
accessory).
TIP!
Depending on the selected settings, not all of the points will be requested. The settings can be
changed retroactively, as described under Point 5.2.
PLEASE NOTE!
When opening the Basic settings menu, a STOP is generally performed.