APV ISOBUS M2, Руководство по эксплуатации

Страница: 13 / 56

13
Display of the current seeding shaft speed in %.
If the seeding shaft is switched off, STOP is displayed and the frame is coloured red. If
the required seeding shaft speed cannot be reached, the bar is coloured yellow and an
alarm is issued (see Point 7 for error messages).
If the seeding shaft is blocked (implement is lifted or forward speed is 0), the frame is
coloured orange.
Display of the calculated still possible remaining area/remaining distance.
For the calculation, the fill quantity of the hopper must be entered in the Set menu (see
Point
6.3.2).
Display of the current forward speed.
The black mark shows the forward speed set during the calibration test. If the forward
speed becomes too high or too low, so that the required speed for the seeding shaft can
no longer be maintained, the bar is coloured red and an alarm is issued (see Point 7 for
controller messages).
Display of the seeded area and the spread quantity for each seed type.
Display of the current fan speed.
The black mark shows the set speed.
When using an electric fan, the speed is displayed in %. When using a hydraulic fan, the
speed is displayed in rpm.
If the set speed limits are exceeded or undercut, the bar turns red and an alarm is issued
(see Point 7 for controller messages).
Detailed information for setting the fan speed or the speed limits is provided under Point
6.3.8.