34
Quality for Professionals
•
Before exiting the tractor, lower the implement onto the ground, switch off the
motor and remove the ignition key!
•
Standing between the tractor and the implement is forbidden unless the vehicle is
secured against rolling away using the parking brake and/or with wheel chocks!
•
Folded frames and lifting devices must be locked in transport position!
•
Packer catch arms must be swivelled in and locked before road transport!
•
Lock the track markers in transport position!
•
The view on the grassland power harrow and the hazardous movement area must
be clear to check the procedure.
•
The implements must be checked regularly by the operator (before every use) for
any fractures and cracks, chafe marks, leaks, loose bolts and connections,
vibrations, unusual sounds, and to ensure they function correctly. The implements
should be cleaned regularly using water or compressed air. Maintenance and
cleaning work must be carried out with the implement lowered, shut down and
secured to prevent it being switched on again. Working under the implement is
forbidden.
•
Hearing protection should be used, if necessary.
•
During assembly, the operator must ensure that the requirements for the tractor in
terms of the power, axle loads and weight distribution as specified in the
operating manual are met and that the connections specified in the operating
instructions are made correctly.
•
When mounting the implement, the operator must ensure that connections to the
tractor hydraulic system are clean and carefully connected.
•
When mounting the grassland power harrow, the operator must ensure that there
is a metallic connection made to the tractor.
•
The operator must ensure that no one is standing close to the grassland power
harrow when it or its components are being moved by the tractor hydraulic system
or when the roller is being lifted or lowered. Visual check by the driver!
•
When performing the work passes, the tractor's speed must maintained as
specified in the operating instructions. This can be between 6 and 12 km/h.
•
The specifications in the operating manual regarding mounting as well as the
calculation of the weight ratios and the axle loads of the tractor must be observed.
•
When driving on roads, which is only permitted with the running gear extended
(both wheels) and with folded side wings and Cambridge rollers, the control block
on the running gear cylinder prevents lowering of the grassland power harrow as
well as of the folded up components (additionally secured with a chain), also in
case of failure of the tractor hydraulic system.
