20
Quality for Professionals
14 Road transport of the GP 600 M1
When using public roads, comply with the respective national road traffic
regulations.
Make sure than none of the safety splints or similar were lost during operation.
Before road transport, check that the hydraulic and brake system are properly
connected and also that the parking brake is released before starting to drive.
Check the braking effect before departing.
Check for proper function of the lighting as well as good visibility of the
warning signs with lighting (accessories).
Secure the GP 600 M1 side parts in transport position against dangerous
changes in the load by using the intended folding lock (stop valve + chain).
Adapt your driving speed to the current conditions.
Only relieve the hydraulic hoses at home (by putting the tractor control unit
into float position).
Remove harrow residues to not lose them on the road (grass, soil,…).
15 Lighting circuit diagram
1
12 V plug, 7-pin
2
Rear light, right
2.1
Turn signal
2.2
Rear light
2.3
Brake light
3
Rear light, left
3.1
Brake light
3.2
Rear light
3.3
Turn signal
Plug and cable assignment:
No. Designation Colour
Function
1
L
yellow
Turn signal, left
2
54g
----
----
3
31
white
Ground
4
R
green
Turn signal, right
5
58R
brown
Rear light, right
6
54
red
Brake light
7
58L
black
Rear light, left
Fig.: 22
LEFT
RIGHT
