16
Quality for Professionals
10.2 Changing the tines
To replace broken or worn tines, all you have to do is loosen the nut and take out the
tine.
As shown in Fig.: 15, you must hook on the new 12 mm tines and re-
tighten the nuts. Pay attention to the proper line distance! The tines in
the rear row cut the distance of the front tines in half.
As shown in Fig.: 16, the 8 mm tines must be fastened with the bolt.
Ensure that the bolt rests firmly on the tine and that all tines form a
straight line. There should be a washer above and below the tine as
well as a washer under the bracket.
Unscrew the nut
Hook for fixing
10.3 Tine safety
As standard, the GP series is equipped with a tine safety that
prevent loss of the 12 mm tines by means of a rope. It
protects the tines so that they do not get lost on the pasture
or on the field. This also prevents damage to other
implements, e.g. the mower or the baler.
11 Location of the rating plate
The rating plate is located on the left of the middle frame.
In cases of inquiries or warranty claims,
please always tell us the production
number of your machine.
Fig.: 15
Fig.: 16
Fig.: 17
Fig.: 18
