17
Quality for Professionals
6
6
4
5
12 Lubrication schedule
The following grease points on the joints and bearings must be lubricated regularly
with universal grease (approx. every 10 operating hours).
1. 1x bearing on the tractor linkage drawbar, lateral slope compensation
(Fig.: 19)
2. 1x pin, pivot point when driving in curves (Fig.: 19)
3. 2x at the end of the drawbar (left and right) (Fig.: 20)
4. 4x the pins on the pivot points when folding and unfolding (left and right)
(Fig.: 21)
5. 2x bearing between the running gear and the frame (Fig.: 21)
6. 8x roller, the bearing at the ends of the roller (Fig.: 21)
7. 4x folding cylinder
8. 2x running gear cylinder
3
3
1
2
Fig.: 20
Fig.: 19
Fig.: 21
