APV GP 600 M1 Скачать руководство пользователя страница 35

Страница: 35 / 40

Quality for Professionals

18.3 Mounted implements

•

Before mounting and dismounting implements on the three-point linkage, move

the operating devices into the position that excludes unintentional lifting or
lowering!

•

For three-point mounting, the mounting categories of the tractor and the

implement must match or be adapted!

•

There is a risk of injury due to crushing and shearing points in the area of the

three-point linkage!

•

Do not stand between the tractor and the implement when actuating the external

controls for the three-point mounting!

•

When the implement is in transport position, always ensure that the tractor three-

point linkage is sufficiently locked to the sides!

•

When driving on roads with the implement lifted, the operating lever must be

locked against lowering!

18.4 Hydraulic system

•

The hydraulic system is under high pressure!

•

When connecting hydraulic cylinders and motors, the specified connection of the

hydraulic hoses must be observed!

•

When connecting the hydraulic hoses to the tractor hydraulic system, make sure

that the hydraulic system on the tractor and implement side is unpressurised!

•

For hydraulic function connections between the tractor and the implement,

coupling sleeves and connectors should be marked to rule out operating errors! If
the connections are interchanged, the function will be inverted!
(e.g., lifting/lowering) – Risk of accident!

•

Inspect the hydraulic hose lines at regular intervals and replace in case of

damage or wear! The replacement lines must comply with the technical
requirements of the implement manufacturer!

•

Due to the risk of injury, use suitable tools when searching for leaks!

•

Liquids escaping under high pressure (hydraulic oil) can penetrate skin and cause

serious injuries! Consult a doctor immediately in case of injury! (Risk of infection!)

•

Before working on the hydraulic system, park the implement, depressurize the

system and switch off the motor!

•

The safety chain should only be unhooked when it is relieved of tension! (Cylinder

must be filled with oil.)

Содержание GP 600 M1









































Результаты поиска

Содержание GP 600 M1

Отзывы:

Похожие инструкции для GP 600 M1

Бренды по названию

Популярные бренды

APV GP 600 M1, Оригинальное руководство по эксплуатации

Результаты поиска

Содержание GP 600 M1

Отзывы:

Похожие инструкции для GP 600 M1

Бренды по названию

Популярные бренды