Apricot XEN Pentium 60, Руководство пользователя

Страница: 93 / 139

6/10 XEN OWNER'S HANDBOOK
Using the SETUP utility
Chapter 6
Change Password
Specifying a password in this utility enables the system password
function. When a password is specified it must be entered
every time the system is booted.
The password can be changed or deleted using this utility. To
delete the password or disable the password function, specify
the new password to be a carriage return.
Once you specify a password, you cannot enter SETUP without
entering the password. If you forget the password, you must
move the password jumper on the motherboard to the “disable
password” position.
A second jumper on the motherboard allows you to disable
SETUP. Information about jumpers is given in Appendix A.
Write to CMOS and Exit
After making any changes to SETUP, select “Write to CMOS
and exit” to save the changes to CMOS and exit the SETUP
program.
Do Not Write to CMOS and Exit
This menu selection exits the SETUP program and discards any
changes made.