Apricot XEN Pentium 60, Руководство пользователя

Страница: 58 / 139

XEN OWNER'S HANDBOOK 4/5
Caring for the Apricot XEN
Chapter 4
2. Rub an alcohol-dampened swab against the surface of
the capstan using an up and down motion. Gently rotate
the capstan and continue rubbing until the entire surface
is clean.
3. Wait for at least one minute before using the tape
drive. This allows any residual alcohol to evaporate.
If you clean the read/write head first, and the swab is not too
discoloured, you may use the same swab to clean the capstan.
But if you clean the capstan first, you must
not use the same
swab to clean the read/write head.
The You should clean the SCSI QIC tape drive after every 8 hours’
SCSI QIC use, using the special cleaning kit available from your Apricot
tape drive supplier. Full instructions for cleaning are provided with this kit.
It is also advisable to clean the tape drive after the first use of
a new tape.
The SCSI DDS The read/write heads in the tape drive are protected during
or DDS-DC normal operation by a built-in cleaning roller. In addition, a
tape drive special cleaning cassette is available from your Apricot supplier.
This cassette should be used:
•
Every 25 operating hours.
•
When a media warning status is indicated.
When you insert the cleaning cassette, the drive recognises it
as a cleaning cassette, runs it for about 20 seconds, then ejects
it automatically. Each time the cleaning cassette is used the
tape advances over an unused portion of the tape. If the drive
ejects the cleaning cassette immediately after you insert it, this
means that the entire tape has been used and a new cleaning
cassette is required. You cannot rewind a cleaning cassette.
Do not attempt to use an ordinary audio DAT cleaning cassette.
The drive will be unable to recognise it as a cleaning cassette.