manualshive.com logo in svg

Apricot XEN Pentium 60, Руководство пользователя

Поделиться
Скачать
Apricot XEN Pentium 60 Скачать руководство пользователя страница 3

Microsoft, MS, and MS-DOS are registered trademarks, and Windows is a trademark, of Microsoft
Corporation.

IBM is a registered trademark, and VGA and PS/2 are trademarks, of International Business
Machines Corporation.

Intel is a registered trademark, and Pentium and OverDrive are trademarks, of Intel Corporation.

Information contained in this document is subject to change without notice and does not
represent a commitment on the part of Apricot Computers Limited. Any software described in
this manual is furnished under a license agreement. The software may be used or copied only in
accordance with the terms of this agreement. It is against the law to copy any disk supplied for any
purpose other than the purchaser’s personal use.

All rights reserved; no use or disclosure without written consent.

Copyright © Apricot Computers Limited 1994

Published by
Apricot Computers Limited
3500 Parkside
Birmingham Business Park
Birmingham  B37 7YS

MITSUBISHI ELECTRIC

Printed in the United Kingdom

Part No. 15273131

Revision 01

Содержание XEN Pentium 60












































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды