manualshive.com logo in svg

Apricot XEN Pentium 60, Руководство пользователя

Поделиться
Скачать
Apricot XEN Pentium 60 Скачать руководство пользователя страница 49

XEN OWNER'S HANDBOOK

3/17

Operating the Apricot XEN

Chapter 3

The drive has its own headphone jack with associated volume
level control.

DISC CADDY SLOT

EMERGENCY

EJECT HOLE

BUSY

INDICATOR

EJECT

BUTTON

COMPACT

CD Caddy

HEADPHONE JACK

AND HEADPHONE LEVEL

Do not attempt to move the computer while a CD is in the
drive, especially if the CD is being played at the time.

The laser beam inside the SCSI CD-ROM drive is
harmful to the eyes. Do not attempt to disassemble
the CD-ROM drive. If a fault occurs, call an authorized
Apricot maintainer.

Inserting a

The SCSI CD-ROM drive uses a special removable disc caddy

compact disc

to hold a CD within the drive mechanism. The caddy has a metal
shutter that guards the disc’s surface; the drive automatically
moves the shutter aside to read the disc. One disc caddy is
provided free with the drive; more can be obtained from your
Apricot supplier. Use only disc caddies supplied by Apricot.

Do not confuse a CD’s storage case with a proper disc
caddy; if you attempt to insert a disc storage case you
will damage the drive.

1.

Ensure that the computer is turned on and that the
drive is empty (the legend “CD Caddy” should appear
on the flap covering of the drive slot).

Содержание XEN Pentium 60












































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды