Apricot XEN Pentium 60, Руководство пользователя

Страница: 24 / 139

XEN OWNER'S HANDBOOK 2/3
Getting started with the Apricot XEN
Chapter 2
Connecting the components
See Chapter 1, “Introducing the Apricot XEN”, if you need
help indentifying the various ports on the system unit.
Checking When your Apricot XEN is delivered, it is ready for the
the AC commercial AC power supply generally available in the country
power supply in which it is sold. It has been set for the correct voltage range,
and is supplied with an AC power cord and plug which comply
with the relevant safety standards.
Before using your XEN in a country other than which it was
originally sold, you must check the voltage and frequency of
that country’s AC power supply, and the type of power cord
required there.
If necessary, the AC voltage setting of the Apricot XEN can be
adjusted by the voltage selection switch on the rear of the
system unit (see the section on “Using the Apricot XEN abroad”
in Chapter 3, “Operating the Apricot XEN”). Note that the
monitor’s voltage setting will probably also need adjusting;
consult the
User’s Guide that accompanies the monitor, or ask
your Apricot supplier for help.
The “Safety and Regulatory Notices” section at the start of the
Owner’s Handbook includes advice about suitable power cords.
Installing If your XEN arrived with uninstalled add-on options, (such
add-on expansion cards or memory modules) consult Chapter 5
options "Upgrading the Apricot XEN" for step-by-step instructions
installing them. Expansion cards may also have their own
documentation.
Note that some options for which you have installation guides
may have already been installed for you at the factory or by your
Apricot supplier.