manualshive.com logo in svg

Apricot XEN Pentium 60, Руководство пользователя

Поделиться
Скачать
Apricot XEN Pentium 60 Скачать руководство пользователя страница 51

XEN OWNER'S HANDBOOK

3/19

Operating the Apricot XEN

Chapter 3

Removing a

1.

Ensure that the computer is turned on (otherwise the

compact disc

E

JECT

 button will not work) and that the drive is not

currently in use (the drive’s activity indicator must be
unlit).

2.

Press the E

JECT

 button. The drive mechanism disengages

and the caddy is partially ejected from the drive.

The E

JECT

 button can be disabled by the software

controlling the CD-ROM drive. In this case pressing
the E

JECT

 button will have no effect.

To eject the drawer manually (for example, after a power
failure) you must first ensure that the computer is turned off.
Then insert a thin metal rod (such as an unwound paper clip)
into the emergency eject hole and push hard (see below). The
rod must be at least 35 mm long.

COMPACT

CADDY LOADED

Caring for

Keep CDs and caddies well away from dust and moisture.

compact discs

Avoid touching the surface of the disc; for example, when the
disc is inside a caddy, do not open the shutter manually and
touch the disc. Also, avoid extremes of temperature and
exposure to direct sunlight.

Содержание XEN Pentium 60












































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды