manualshive.com logo in svg

Apricot XEN Pentium 60, Руководство пользователя

Поделиться
Скачать
Apricot XEN Pentium 60 Скачать руководство пользователя страница 113

XEN OWNER'S HANDBOOK

A/3

Inside the Apricot XEN

Appendix A

Handle static-sensitive items with extreme care. Hold expansion
cards and add-on components only by their edges, avoiding
their electrical contacts. Never touch the components or
electrical contacts on the motherboard or on expansion cards.
In general, do not handle static-sensitive items unnecessarily.

Keep all conductive material, and food and drink, away from
your work area and the open computer.

Removing the top cover

1.

Turn off both the Apricot XEN system unit and the
monitor.

2.

If your AC power outlets have switches, set them to
their Off positions.

3.

Unplug all power cords from rear of the system unit.

4.

If the system unit has a caselock (on the right-hand
side), turn the caselock key to the unlocked position.

5.

Loosen the two casing screws.

6.

Slide the top cover rearwards slightly, then lift it off.

Refitting the cover is the reverse of removal. Take effective
anti-static precautions while the top cover is off.

CASING SCREW

CASING SCREW

Содержание XEN Pentium 60












































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды