Apricot XEN Pentium 60, Руководство пользователя

Страница: 103 / 139

XEN OWNER'S HANDBOOK 7/9
Troubleshooting
Chapter 7
Remedy
Insert a 3 1 /
2
" diskette metal-shutter end first, with the label side facing up.
Insert a 5 1 /
4
" disk with the write protect notch near you and to the left.
Do not try to remove the object with tweezers or any similar implement:
you will damage the drive. Call an authorized Apricot maintainer.
Consult your operating system documentation.
Try a proprietary data recovery utility. Ask your Apricot supplier or an
authorized Apricot maintainer for advice.
A cold disk brought into a warm room may collect condensation.
Wait until the disk has adjusted to room temperature before using it.
If you are using a 3 1 /
2
" floppy disk, slide the small tab on the back of the
diskette to cover the hole beneath. Re-insert the diskette and try again.
If you are using a 5
1
/
4
" floppy disk, check that the write protect notch on the
edge of the disk is uncovered. Remove any write protect sticker and try again.
File attributes and access permissions may be set by your operating system.
Consult your operating system documentation. The SETUP utility may also
prevent access to the drive.
Do not force the lever when there is no disk in the drive as doing so
will break the mechanism.
The drive mechanism may not drop downwards properly onto a 3
1
/
2
"
disk. Try ejecting and reloading the disk.
In a 5
1
/
4
" disk drive turning the disk eject lever engages the drive
mechanism. Make sure that the disk is fully home and the lever is in
the locked position.
Try loading a disk and displaying its directory. If the directory appears,
then LED failure is indicated. Call an authorized Apricot maintainer.
If the indicator doesn't light and you cannot display the directory
of a disk loaded in the drive, there is probably a fault with the drive