Applied Biosystems CytoFluor 4000 Series Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 221

Applied Biosystems CytoFluor 4000 Series Скачать руководство пользователя страница 5

US Safety and EMC (Electromagnetic Compliance) Standards

Safety

This instrument has been tested to and complies with standard ANSI/UL 3101-1, “Electrical
Equipment for Laboratory Use; Part 1: General Requirements”, 1st Edition. It is an ETL Testing
Laboratories listed product.

EMC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.

Note: Shielded cables must be used with this unit to ensure compliance with the Class A FCC limits.

Canadian Safety and EMC (Electromagnetic Compliance) Standards

Safety

This instrument has been tested to and complies with standard C22.2 No. 1010-1-92, “Safety
Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use; Part 1:
General Requirements”. It is an ETL Testing Laboratories listed product.

Sécurité

Cet instrument a été vérifié avec la norme C22.2 No. 1010-1-92, «Spécifications de sécurité du
matériel électrique utilisé pour les mesures, les contrôles et dans les laboratoires ; Partie 1 :
Spécifications générales», et il est conforme à cette norme. C’est un produit homologué par les
ETL Testing Laboratories.

EMC

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le
materiel brouilleur du Canada.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

«
...
3
4
5
6
7
...
»

Содержание CytoFluor 4000 Series






























































































































































































































Отзывы:

Нет отзывов