36
PNEG-2340
Feed-Link 2
10. Display Unit Calibration and Setup
Figure 10A Display Unit Calibration and Setup
Features
The INT-4851 and INT-4853 is a display unit used
to display the weight of feed in a bin. The INT-4851
and INT-4853 has eight (8) load cell inputs and
a water meter input. The user can calibrate the
display at empty and full feed weights through
a one time start-up selection, after which the display
unit will display the weight of feed remaining in
pounds or kilograms. In addition, the unit can be
hooked up to a RS485 network with up to 50 other
bins. The display unit can then be accessed
remotely via internet or directly through a Network
Master located on the network.
FOR CUSTOMER USE
Enter the serial number located on the side of the
display unit below for future use.
Model: INT-4851 and INT-4853
Serial number:
Bin node ID:
(Between 1 and 50)
Bin node name:
(Actual bin description. Alpha
numeric characters.)
