AP Cumberland Feed-Link 2, Инструкция по установке и эксплуатации

Страница: 13 / 46

PNEG-2340 Feed-Link 2 13
4. Load Cell Installation
Removing Anchor Nuts
1. Use a 3/4" wrench or crescent to remove the
nut and washer from the anchor bolt on the bin
leg.
(See Figure 4A.)
2. Remove the side bolts using 9/16" wrench and
impact wrench or ratchet. (See Figure 4B and
Figure 4C.)
3. Repeat on all the bin legs.
Figure 4A Removing Nut from the Anchor Bolt
Figure 4B Remove leg anchor base plate side bolts
using impact wrench and wrench.
Figure 4C All bolts, nuts and washers removed from
the anchor base plate.