Answer Drives GT3000, Руководство по аппаратному и программному обеспечению

Страница: 75 / 128

GT3000 External Power Supply
IMGT30017EN 63
GTAL230F1 External power supply for SVGT011-028F control boards.. SAP code: 1000002621
6A.4.2 External control supply management
With the new parameter Control Supply Line [06.09] = External , it is possible to enable the external control power management that provides, when
required, masking of the main power check protections.
:
Protection Size Hw/Sw Link Description
F0105 GT >28 Hw P220Verror Control supply loss
F0110 All Hw UnderVdc Minimum DC Voltage Protection
F0113 All Hw BrakeOrPrecFault Internal Precharge BypassSystem Failure
F0115 All Hw NoGrid Loss of Main Voltage
F0201 All Sw PrecErr Precharge Fault
F0209 All Sw UnderVoltageErr UnderVoltage Protection bus DC (programmable threshold)
F0215 200>GT>028 Sw InputPhaseLossWork Input phase loss (programmable by Input Single Phasing [11.18])
GT>=200 Always enabled
GT<=028 Doesn’t work.
Main power checking is enabled by DI – DriveEnable :

DI- DriveEnable = Close  main power check enabled

DI- DriveEnable = Open

main power check disabled
When the DI- DriveEnable is open the protection Main Contactor Fault will be delayed for 60 [s] in order to avoid this protection at the shut down of
the main power. If after this time the voltage of the DC bus doesn’t drop below the threshold (UV-VDC Set Point [69.01]), the protection will become
active.
O O u u t t p p u u t t - 530Vdc
T T o o d d r r i i v v e e
I
I
n
n
p
p
u
u
t
t - 230V single phase 100W