000-015-480 Issue 5
22
nd
May 2017
Anite S-CORE Getting Started Guide
Page 17 of 47
Commercial In Confidence
After you install the new version, you can then
Import
the settings exported from the previous
S-Core GUI application.
3.
Insert the GUI Installation DVD included in the delivery package into your computer’s DVD drive
and click on the S-CORE GUI setup program.
Follow the on-screen instructions to install the GUI and update all the default files.
Note:
It is strongly recommended to install the S-CORE GUI to a folder where the user has full
control permissions.
4.
Once the GUI is installed, a shortcut will be created on your desktop.
5.
Before logging in with the GUI, wait for five minutes from when the S-CORE has been powered
ON. Logg
ing in early will trigger the GUI to display an error message “connection refused”.
Should this occur, please wait for another minute and try to log in again.
Once the GUI has been installed on your work station you can easily manage test campaigns,
run tests and record results remotely.
Important notes:
Always
use the front panel Power Button (section 2.1 [8]) to restart the S-CORE test system.
Do not
switch off the S-CORE system using the power button on the rear of the unit.
If you have an optional monitor connected to the S-CORE,
do not
use the Restart Instrument
button available in the S-CORE Monitor GUI (see section A1).
Incorrect shutdown or restarting of the unit could lead to abrupt power loss, which may cause file
system errors.
3.4
Updating software packages
Updating or installing new software packages can be performed in two different methods depending
if the GUI is available or not. Below is a simple explanation of these two methods, for further
assistance please refers to the
Anite S-CORE Application Testing: Operating Guide
.
To update S-CORE software packages, follow these simple steps which should be performed one
package at a time:
1.
Download the latest packages from the Keysight Software Manager, which is accessible through
, and save on your local workstation.
2.
If GUI is available please refer to
Step a
, if not please perform
Step b
.
a.
Using Package Manager
The Package Manager menu item could be accessed from the Tools menu, prompting the
Package Manager window. Clicking on the Upload button opens the Choose Files window.
Continue with Step 3.
b.
Using GUI Login Screen
when installing software packages for the first time after installation of Application server
or installing new license file when existing one is expired, open the S-CORE GUI, click on
Install button (If Install button is not available, Hold the Alt key and press the
Login
button). The GUI will display a prompt; Clicking
Yes
will prompt the Choose Files window
from where the user can select the packages to install. Refer to the next step. Clicking
No
will close the message box and cancel process.
3.
From the Choose Files window select one of the packages downloaded, since every package
should be installed separately. The latest version will automatically replace older packages.
