000-015-480 Issue 5
22
nd
May 2017
Anite S-CORE Getting Started Guide
Page 34 of 47
Commercial In Confidence
2.
Set the values of the P-CSCF addresses using the IP address of the Application Server, and
using the serial number of the S-CORE unit as the final four digits (1921 above).
For more detailed information about the options, refer to the S-CORE Connect Operating Manual.
SIM & Security tab
Important settings needed for testing:
Table 11 SIM & Security settings
Setting
Description
MCC, MNC
Mobile Country Code and Mobile Network Code that RAT will broadcast.
K value, IMSI
Information of test SIM card. Refer to the System Configuration Document.
RAND
16 bytes random number for the authentication.
Milenage
Default Value - Off
For detailed information about the settings, please refer to the
Anite S-CORE Application Testing:
Operating Guide
.
After changing the settings or starting test cases for the first time after logging in to the S-CORE
GUI, first click on
Apply
and then
Switch on
the cell.
5.2.3
WCDMA-RAT
To change the cell settings for WCDMA-RAT, right click on the cell and then select
Settings of
WCDMA-RAT
.
