000-015-480 Issue 5
22
nd
May 2017
Anite S-CORE Getting Started Guide
Page 42 of 47
Commercial In Confidence
7
RADIO LAYER LOGGING
You can trace the radio layer message exchange related to the test run.
7.1
Starting radio layer tracing
To start radio layer tracing, click on the Launch Tracer button on the toolbar.
This will open a separate logging window which traces the lower layer messages.
You will be able to view the message exchange in two views, one as simple 'list view' and the other
'sequence chart view' showing message exchange between different layers.
When you select a message, you can view the detailed decoded message contents and the message
dump on the right-hand pane.
You can stop the tracing by clicking the
Close
button in the logging window (above).
