000-015-480 Issue 5
22
nd
May 2017
Anite S-CORE Getting Started Guide
Page 18 of 47
Commercial In Confidence
4.
The user will be notified with a pop-up message from the server (after first login when following
Step b) when the package has been installed successfully.
5.
After successful installation, repeat Step 2 for every package individually.
Notes:
If the package version to be installed is the same as your current package version, a different
installation procedure should be performed: first remove the currently installed package and
then upload the other package. After successful installation of the package, you will be notified.
Reboot the system after 3 minutes to make sure installation of packages is ready.
3.5
Installing the S-CORE External RF Controller
The Anite External RF Controller installs macros required by some scripts.
Important note:
Before installing the S-CORE External RF Controller, ensure that the S-CORE GUI
is installed as described in section 3.3.
To install the S-CORE External RF Controller:
1.
Download the
S-CORE External RF Controller
zip from the Keysight Software Manager, which
, and save it on the Test System PC.
2.
On Test System PC, extract the downloaded file and run the application:
SCORE_External_RF_Controller_<version>.exe
Where <version> is the version number of the application. The following dialog is displayed.
