000-015-480 Issue 5
22
nd
May 2017
Anite S-CORE Getting Started Guide
Page 6 of 47
Commercial In Confidence
2
S-CORE TEST SYSTEM OVERVIEW
This section describes the units in the S-CORE test system.
Caution:
Please refer to the
Safety Instructions
section in the Anite S-CORE Application Testing:
Operating Guide before starting to connect the S-CORE.
2.1
S-CORE Connect
Front View
Table 1
Front view panel
LED Indicators
1.
Session Active LED Indicator
LED green
–
indicates that a session has been
established with an external connection. The LED will be
green as long as the session remains connected.
LED off
–
indicates that no session has been established
with the test system.
LED orange
—
indicates that a session has been
established with the test system and the session is
locked.
2.
Status LED Indicator
LED green
–
indicates that the test system is in the
ready state and has no errors in the queue.
LED orange
–
indicates that the error/event queue is
not empty.
LED red
–
indicates a serious fault in the test system.
3.
Streaming port 1B LED Indicator
LED orange
–
indicates that the test system is in
