Animas IR 1200, Руководство пользователя

Страница: 24 / 100

Page 24
5
2. Check your battery cap to be sure the colored (blue or yellow) o-ring is not torn or damaged.
3. Check the vent hole on the top of the battery cap to be sure it is clear of debris. This vent
maintains pressurization while preventing water from entering the compartment.
The battery
cap should be replaced once each year or sooner if the o-ring is damaged or the vent is
clogged. See Chapter 13, Care and Maintenance.
4. Insert the Energizer AA L91 Lithium (1.5V) battery into the battery compartment with the
positive (+) end going in first.
5. Replace the cap by turning clockwise until secure but
do not over tighten . The cap should be
flush with the pump case and you should not see the colored o-ring.
6. Each time you change the battery, your IR 1200 will run a series of self-tests, which will last
a few seconds. The Animas logo will be displayed briefly. The pump will
give a beep to alert you to verify (or change) the time/date, language and
battery type.
7. Check the displayed time/date, battery type and language. If correct,
scroll down to highlight Confirm and press the OK/Enter button. The Wake-
up screen will be displayed. For more details on changing the time and
date, see next section,
Setup - Basics, Setting/Changing Time and Date.
Note: The time and date must be set correctly to Confirm the Verify screen.
8. To change the battery type, highlight the battery field and press OK/Enter
to activate Edit Mode (indicated by flashing cursor).
9. Use the Up/Down arrows to change battery type and press OK/Enter to
confirm and exit Edit Mode.
10. Scroll to Confirm and press OK/Enter. The wake-up screen is
displayed.
Note: Until you have programmed a basal rate, the Alert screen shown here
will appear when the pump is awakened. Simply scroll to Confirm and press OK/Enter to move
past this Alert screen.
Energizer AA L91
Colored o-ring
Battery Cap Vent