Anilam 4200T, Руководство пользователя

Страница: 40 / 48

CNC Motion Setup/Testing Utility
P/N 70000634C
Setting Up and Tuning the C-Axis
IMPORTANT: You must set up and tune the X-axis and Z-axis together
before you set up and tune the C-axis.
To set up and tune the C-axis, repeat the procedures for setting up and
tuning the X-axis and Z-axis in the previous sections. Substitute
C axis
whenever the procedures require you to select an axis.
Use M19 to enable C-axis programming and M05 to disable C-axis
programming. After you enable the C-axis, you can use the C key on the
keypad to activate or deactivate the C-axis. For additional information on
C-axis programming, refer to the
4200T CNC Programming and
Operations Manual , P/N 70000412.
Figure 20 displays the test results screen for the C-axis tuning
parameters.
Figure 20, Tuning Parameters Test Results Screen for C-Axis
All rights reserved. Subject to change without notice.
November 2009
36