Anilam 4200T, Руководство пользователя

Страница: 10 / 48

CNC Motion Setup/Testing Utility
P/N 70000634C
Detecting the Index Pulse (F3)
Refer to Figure 1, CNC Motion Setup/Testing Screen . When you press
IndexP ( F3 ), the CNC displays a flashing “ I ” each time it detects an Index
Pulse. The flashing “I” replaces the axis name (X, Z, or S) of the active
axis. The index pulse indicator (flashing “
I ”) for the spindle axis is
displayed on the RPM field. The figure shows the axis display when the
CNC has detected an index pulse in the (active) X-axis. Refer to
Figure 3 .
To detect an index pulse:
1. Move the active axis to check for the presence of an index pulse.
2. On systems with rotary encoders with index pulses, the index pulse
should be detected once per revolution.
3. On systems having linear scales, the index pulse should be detected
where the linear scale specifies location of the index pulse.
Index Pulse
Indicator
I
Z
Figure 3, Index Pulse Indicator
Canceling the Active MDI or Test Command
Press Manual ( F4 ) to cancel an active MDI or test command.
Activating Manual Data Input Mode (MDI)
Press MDI ( F5 ) to activate the MDI prompt. (Refer to the 4200T CNC
Programming and Operations Manual , P/N 70000412, for information on
MDI programming.)
All rights reserved. Subject to change without notice.
November 2009
6