AMX Optima SD, Инструкция по эксплуатации

Страница: 28 / 82

Installation & Setup
23 Optima SD Instruction Manual
Attaching Serial Controllers
An external serial controller is any device that can send and receive ASCII code over an RS-232
(null modem) serial cable attached to the CONTROL (RS-232) port on the enclosure’s CPU. PCs are
common serial controllers. Once a PC is attached to an Optima SD enclosure, the system can be
controlled by running APControl software on the attached PC (see the
AMX AutoPatch CD ). The system
can also be controlled by entering BCS commands into a terminal emulation program, such as
HyperTerminal. For information on BCS commands, see the
BCS Protocol Instruction Manual on the
AMX AutoPatch CD or at www.amx.com .
PC Requirements for APControl 3.0
Windows XP Professional
®
or Windows 2000
®
Java Runtime Environment (JRE): v1.4.2 or the latest version
Minimum Hardware: 166 MHz, 128 MB RAM, 20 MB free disk space, 800x600 display
Recommended Hardware: 2.0 GHz, 512 MB RAM, 20 MB free disk space,
1280x1024 display
Serial port
PC Requirements for BCS
Windows XP Professional
®
or Windows 2000
®
Terminal emulation program
Serial port
To establish external serial control over a null modem serial cable:
1.
Use a null modem cable that matches the pin diagram in FIG. 9 for RS-232 without hardware flow
control. AMX AutoPatch equipment requires pins 2, 3, and 5 only.
FIG. 9
RS-232 null modem pin diagram, no hardware flow control