AMX Optima SD, Инструкция по эксплуатации

Страница: 48 / 82

Stereo Audio Input/Output Boards
43 Optima SD Instruction Manual
To adjust digital input gain using the BCS Absolute Method:
1.
Enter the command below. Replace the “
#
”s with the level and input number(s) and replace “
^^^
”
with the decibel level. Enter the decibel level as a decimal number to the tenth place without the
decimal point (e.g., -5 dB is entered as -50).
CL#I#VA^^^T
Example
Adjust the input gain of Input 4 to +10 dB on Level 2 (VM 2) by entering the following BCS command
line:
CL2I4VA100T
Note: Alternative methods for adjusting input gain with BCS commands can be found in the “BCS
Protocol Instruction Manual.”