AMX Optima SD, Инструкция по эксплуатации

Страница: 37 / 82

Installation & Setup
32 Optima SD Instruction Manual
To disconnect the factory default switch using the control panel:
1.
Press the Function Key.
The Function menu appears.
2. Locate Disconnect by scrolling with the Control Dial.
3. Press the Select Key.
The system is in Disconnect Mode (all the available Input and Output Keys turn blue).
4.
Press Input Key 1.
Input Key 1 turns white, indicating that it is selected.
5. Press the Take Key.
Input 1 is disconnected from all of the Output Keys (the keys turn blue).
The test switch below switches Input 2 to Output 1 on VM 0.
To execute a test switch using the control panel:
1. Press the Function Key.
The Function menu appears.
2.
Press the Select Key to choose Change.
The system is in Change Mode (the available Input and Output Keys turn blue).
3. Press Input Key 2.
Input Key 2 flashes, indicating that it is ready to switch.
4.
Press Output Key 1.
Output Key 1 illuminates, indicating that it is ready to accept the switch.
Current virtual matrix – VM 0
Current virtual matrix – VM 0