manualshive.com logo in svg

AMX NetLinx Master-Ethernet Card/Module NXC-ME260, Руководство по программированию, Страница: 78 / 162

Поделиться
Скачать
AMX NetLinx Master-Ethernet Card/Module NXC-ME260 Скачать руководство пользователя страница 78

WebConsole - System Options

70

NI Series WebConsole & Programming Guide

To browse for a Module file and then upload it to the Master:

1.

Click the 

Browse

 button next to the 

Select a module to upload

 text field to browse for Duet 

Modules on your PC/Network.

2.

Select the JAR file that you want to upload to the Master.

3.

Click the 

Submit

 button to upload a copy of the selected JAR file to the target Master's 

/unbound

 

directory.

 

If a file of the same specified name already exists within the 

/unbound

 directory, the system 

will prompt you to confirm overwriting the existing file.

 

Only JAR file types are allowed for Upload to the target Master.

Manage Devices - Bindings

Click the 

Bindings

 link (in the 

Manage Devices

 tab) to access the 

Manage Device Bindings

 page 

(FIG. 48). Use the options on this page to configure application-defined Duet virtual devices with 
discovered physical devices. 

The table on this page displays a list of all application-defined devices, including each device’s "Friendly 
Name", the Duet virtual device’s D:P:S assignment, the associated Duet Device SDK class (indicating 
the type of the device), and the physical device’s D:P:S assignment. This information has to be pre-coded 
into the NetLinx file currently on the Master.

Any corresponding module within the /bound directory will not be deleted. Bound 
modules must be deleted via the Purge Bound Modules on Reset selection described 
within the Configure Device Bindings section.

FIG. 48  

System - Manage Devices (Manage Device Bindings)

Содержание NetLinx Master-Ethernet Card/Module NXC-ME260



































































































































































Отзывы:

Нет отзывов