AMX NetLinx Master-Ethernet Card/Module NXC-ME260, Руководство по программированию

Страница: 113 / 162

Terminal (Program Port/Telnet) Commands
105 NI Series WebConsole & Programming Guide
Terminal Commands (Cont.)
Command Description
SET FTP PORT
Enables/Disables the Master’s IP port listened to for FTP connections.
Note :
The Master must be rebooted to enable new settings.
Example:
>SET FTP PORT
FTP is enabled
Do you want to enable (e) or disable (d) FTP (enter e or d):
FTP enabled, reboot the master for the change to take affect.
SET HTTP PORT
Sets the Master’s IP port listened to for HTTP connections.
Note :
The Master must be rebooted to enable new settings.
Example:
>SET HTTP PORT
Current HTTP port number = 80
Enter new HTTP port number (Usually 80) (0=disable HTTP):
Setting HTTP port number to
New HTTP port number set, reboot the master for the change
to take affect.
SET HTTPS PORT
Sets the Master’s IP port listened to for HTTPS connections.
Note :
The Master must be rebooted to enable new settings.
Example:
>SET HTTPS PORT
Current HTTPS port number = 443
Enter new HTTPS port number (Usually 443) (0=disable HTTPS):
Once you enter a value and press the ENTER key, you get the follow-
ing message:
Setting HTTPS port number to
New HTTPS port number set, reboot the master for the change
to take affect.
SET ICSP PORT
Sets the Master’s IP port listened to for ICSP connections.
Note :
The Master must be rebooted to enable new settings.
Example:
>SET ICSP PORT
Current ICSP port number = 1319
Enter new ICSP port number (Usually 1319) (0=disable ICSP):
Once you enter a value and press the ENTER key, you get the follow-
ing message:
Setting ICSP port number to
New ICSP port number set, reboot the master for the change
to take affect.
SET ICSP TCP TIMEOUT
Sets the timeout period for ICSP and i!-WebControl TCP connections.
Note : The new timeout value is immediately (no reboot required).
Example:
>SET ICSP TCP TIMEOUT
This will set the timeout for TCP connections for both
ICSP and i!-WebControl.When no communication has been
detected for the specified number of seconds, the socket
connection is closed.ICSP and i!-WebControl have built-in
timeouts and reducing the TCP timeout below these will
cause undesirable results. The default value is 45
seconds.
The current ICSP TCP timeout is 45 seconds
Enter new timeout (in seconds):
Once you enter a value and press the ENTER key, you get the follow-
ing message:
New timeout value set (in affect immediately).