Initial Configuration and Firmware Upgrade
8
NI Series WebConsole & Programming Guide
Once Serial communication has been established, use NetLinx Studio to configure the Controller for
Ethernet Communication, as described below.
Configuring the NI Controller for Ethernet Communication
Before continuing, complete the COM port steps above.
1.
Use an Ethernet cable to connect the Controller to the LAN to which the PC running NetLinx Studio
is connected.
2.
Select
Diagnostics
>
Network Address
from the menu bar and enter the System, Device
(0 for a
Master
), and Host Name information.
3.
To configure the Address:
Use a DHCP Address by selecting the
Use DHCP
radio button, then click the
GET IP
button
(
to obtain a DHCP Address from the DHCP Server
), click the
SET IP Information
button (
to
retain the new address
), and then finish the process by clicking the
Reboot Master
>
OK
buttons.
Use a Static IP Address by selecting the
Specify IP Address
radio button, enter the IP
parameters into the available fields, then click the
SET IP Information
button (
to retain the
pre-reserved IP Address to the Master
), and then click the
Reboot Master
>
OK
buttons to
finish the process.
4.
Repeat steps 1 - 5 from the previous section, but rather than selecting the
Serial
option, choose
TCP/IP
and edit the settings to match the IP Address you are using (Static or IP).
5.
Click on the
Authentication Required
radio box (
if the Master is secure
d) and press the
User
Name and Password
button to enter a valid username and password being used by the secured
Master.
6.
Click the
OK
to close all dialogs and return to the main application.
Using the ID Button to Change the Master Device Value
The steps described and the dialogs shown in this section are in the NetLinx Studio application.
The NI-x100 Controllers feature an Auto MDI/MDI-X Ethernet port. This provides the
option of using either a standard (straight through), or a crossover Ethernet cable to
communicate with a PC - both cable types will work.
Содержание NetLinx Master-Ethernet Card/Module NXC-ME260
