AMX NetLinx Master-Ethernet Card/Module NXC-ME260, Руководство по программированию

Страница: 115 / 162

Terminal (Program Port/Telnet) Commands
107 NI Series WebConsole & Programming Guide
Terminal Commands (Cont.)
Command Description
SET SNMP
Sets SNMP read and write community strings. This command invokes
the SET SNMP sub-menu:
>SET SNMP
--- Enter New Values or just hit Enter to keep current
settings
SNMP Enabled (Y or N)? N y
Enter System Description: NetLinx VxWorks SNMPv1/v2c Agent
Enter System Contact: AMX LLC
Enter System Location: Richardson, TX USA
Enter Read community string: public
Enter Write community string:private
You have entered:
Description = NetLinx VxWorks SNMPv1/v2c Agent
Contact = AMX LLC
Location = Richardson, TX USA
Read Community = public
Write Community = private
Is this correct? Type Y or N and Enter->
Note : The "System Description", "System Contact" and "System
Location" are the values that will be published for the Master via
SNMP. The system must be rebooted once the new values are
entered.
SET SSH PORT
Sets the Master’s IP port listened to for SSH connections.
Note :
The Master must be rebooted to enable new settings.
Example:
>SET SSH PORT
Current SSH port number = 22
Enter new SSH port number (Usually 22) (0=disable SSH):
Once you enter a value and press the ENTER key, you get the
following message:
Setting SSH port number to 22
New SSH port number set, reboot the Master for
the change to take affect.
SET TELNET PORT
Sets the Master’s IP port listened to for Telnet connections.
Note :
The Master must be rebooted to enable new settings.
Example:
>SET TELNET PORT
Current telnet port number = 23
Enter new telnet port number (Usually 23)(0=disable Telnet):
Once you enter a value and press the ENTER key, you get the
following message:
Setting telnet port number to 23
New telnet port number set, reboot the Master for the
change to take affect.