Step 6: Setting the CONTROL IP Address For the Server
30
MAX HT Four-Zone System Setup Guide
1.
Enter an
IP Address
for the MAX server and press TAB to fill in the
Netmask address
.
2.
Press Tab again to populate the
Default Gateway (IP) address
. By default, MAX servers use a
default Gateway address ending in "
.254
". In most cases, this will need to be changed. Find out from
your network administrator what Gateway address would be appropriate to assign to the MAX
server.
3.
Press Tab again to populate the last item -
Primary Nameserver
.
Again, ask the network administrator the IP of the primary DNS on the network. Enter the
DNS address and press TAB to select
OK
.
4.
Press Enter to save your changes.
This will shut down the interface and bring it back up, with the new IP Address information in
place.
Do not use DHCP with MAX servers.
Содержание MAX-AOM
