background image

NetLinx Programming

74

NetLinx Integrated Controllers (Firmware v4)- WebConsole & Programming Guide

NetLinx Programming

Overview

This section describes the Send_Commands, Send_Strings, and Channel commands you can use to program the Master. The 

examples in this section require a declaration in the DEFINE_DEVICE section of your program to work correctly. Refer to the 

NetLinx 

Programming Language

 instruction manual for specifics about declarations and DEFINE_DEVICE information.

NOTE: 

NetLinx programming information for each Master is provided in the Master’s Operation/Reference Guide (available at 

www.amx.com).

Port Assignments by NetLinx Master

Master SEND_COMMANDs

These commands are specific to the Master and not the Controller. These commands are sent to the DPS 0:1:0 (the Master you are 

connected to). A device (<DEV>) must first be defined in the NetLinx programming language with values for the Device: Port: 

System (<D:P:S>).      

Port Assignments By Master

Master

RS-232/422/485

IR/Serial

IR/RX

Relays

I/O

NI-700

Ports 1 - 2

Port 3

Port 5

Port 4

NI-900

Port 1

Ports 2-4

Port 6

Port 5

NI-2100

Ports 1 - 3

Ports 5-8

Port 4

Port 9

NI-3100

Ports 1 - 7

Ports 9-16

Port 8

Port 17

NI-4100

Ports 1 - 7

Ports 9-16

Port 8

Port 17

NI-3101-SIG

Ports 1 - 6

Ports 9-16

Port 8

Port 17

DVX-21xxHD

Ports 1 - 3

Ports 5-8

Port 4

Port 9

DVX-315xHD

Ports 1 - 6

Ports 9-16

Port 8

Port 17

Master SEND_COMMANDs

Command

Description

CLOCK

Set the date and time on the Master. The date and time settings are propagated over the local bus.
Syntax:

SEND_COMMAND <DEV>,"'CLOCK <mm-dd-yyyy> <hh:mm:ss>'"

Variables:
• mm-dd-yyyy = Month, day, and year. Month and day have 2 significant digits. Year has 4 significant digits.
• hh-mm-ss = Hour, minute, and seconds. Each using only 2 significant digits.
Example:

SEND_COMMAND 0,"'CLOCK 04-12-2005 09:45:31'"

Sets the Master's date to April 12, 2005 with a time of 9:45 am.

G4WC

Add G4 Web Control devices to Web control list displayed by the Web server in a browser. The internal G4WC 

Send command (to Master 0:1:0) has been revised to add G4 Web Control devices to Web control list displayed 

in the browser. 
Syntax:

SEND_COMMAND <D:P:S>,"'G4WC "Name/Description",IP Address/URL,IP Port,Enabled'"

Variables:
• Name/Description = A string, enclosed in double quotes, that is the description of the G4 Web Control 

instance. It is displayed in the browser.

• IP Address/URL = A string containing the IP Address of the G4 Web Control server, or a URL to the G4 Web 

Control server.

• IP Port = A string containing the IP Port of the G4 Web Control Server.
• Enabled = 1 or 0. If it is a 1 then the link is displayed. If it is a 0 then the link is disabled. 

The combination of Name/Description, IP Address/URL, and IP Port are used to determine each unique 

listing.

Example:

SEND_COMMAND 0:1:0,"'G4WC "Bedroom",192.168.1.2,5900,1'"

Adds the BEDROOM control device using the IP Address of 192.168.1.2.

~IGNOREEXTERNAL

CLOCKCOMMANDS

Set the Master so that it cannot have it’s time set by another device which generates a ‘CLOCK’ command. 
Syntax:

SEND_COMMAND <D:P:S>,"'~IGNOREEXTERNALCLOCKCOMMANDS'"

Example:

SEND_COMMAND 0:1:0,"'~IGNOREEXTERNALCLOCKCOMMANDS'"

Содержание DVX-21XXHD





















































































































Отзывы: