AMX DVX-21XXHD Скачать руководство пользователя страница 50

Страница: 50 / 116

WebConsole - System Options

NetLinx Integrated Controllers (Firmware v4)- WebConsole & Programming Guide

The device will appear in the Diagnostics Options window, in the next available column (to the right of the last device added

- see FIG. 54).

NOTE:

You can monitor diagnostics for up to eight System Devices in this page.

Diagnostics Options Definitions

The following table describes each of diagnostics options that can be enabled via the Edit Options window:

Disabling all Diagnostic Options For a Device

There are two ways to disable all diagnostics for a device:



In the Edit Options window, select

Delete

to remove the device from the Diagnostics Options page and disable all

diagnostics.



In the Edit Options window, deselect all selected diagnostics options and click

Update

. This disables all diagnostics for this

device, but leaves the device on the Diagnostics Options page.

FIG. 54

Edit Options window indicating four devices with Diagnostics enabled

Diagnostic Options

Diagnostic Option

Description

All Notifications:

Enables every notification field.

System

• Number
• Device
• Port:

Use these fields to enter a Device:Port:System (D:P:S) combination for the device for which you want to enable

notifications. A value of

for any option gives you all of the systems, devices, or ports. This dialog also allows

you to store/recall presets.

Messages

• Online/Offline

Generates a message when there is a change in the target device’s online/offline status.

• Configuration

Generates a message when there is a change in the target device’s configuration.

• Status

Generates a message when there is a change in the target device’s status.

Channel Changes
• Input

Generates a message when there is an input channel change (i.e. Push/Release) in the target device.

• Output

Generates a message when there is an output channel change (i.e. CHON/CHOFF) in the target device.

• Feedback

Generates a message when there is a feedback channel change in the target device.

Device Options

• Level Changes From

Generates a message when there is a level channel change from the target device.

• Level Changes To

Generates a message when there is a level channel change to the target device.

• Strings To

Generates a message when there is a string sent to the target device.

• Strings From

Generates a message when there is a string from the target device.

• Commands To

Generates a message when there is a command to the target device.

• Commands From

Generates a message when there is a command from the target device.

• Custom Events From

Generates a message there is a custom event occurring from the target device.

Содержание DVX-21XXHD





















































































































Результаты поиска

Содержание DVX-21XXHD

Отзывы:

AMX DVX-21XXHD, Руководство по программированию и веб-консоли, Страница: 50 / 116

Результаты поиска

Содержание DVX-21XXHD

Отзывы: