Amsco RELIANCE 444 HTM, Руководство по установке

Страница: 21 / 36

3-1
Installation Instructions Uncrating/Installation Instructions P-920012-041
The Amsco ® Reliance ® 444 HTM Single-Chamber Washer/Disin-
fector operates on:
• 380/400/415 V, 50 Hz, 3-phase, 4-wire
A protective ground conductor is required (Class 1 Equipment).
Maximum current and power consumptions are indicated on
nameplate (see Figure 2-2).
This equipment is designed to give optimal results under the
following conditions:
- Indoor use only;
- Altitude of operation up to 6562 ft (2000 m);
- Temperature 5°C (41°F) to 40°C (104°F);
- Maximum relative humidity is 80 percent for temperatures up
to 31°C (88°F), decreasing linearly to 50 percent relative
humidity at 40°C (104°F);
- Main supply voltage fluctuation not exceeding ± 10 percent of
nominal voltage;
- Installation Category III (except for the control supply, Instal-
lation category is II);
- Pollution Degree 2.
Equivalent Sound Pressure Level at work station (measured 36"
[1 m] away from equipment and at 63" [1.6 m] from ground):
67.6 dB (A) (Results determined according to
ISO-3746: 1979
Standard: Acoustics Determination of Sound Power Levels of Noise
Sources Survey Method).
INSTALLATION INSTRUCTIONS
3
Technical
Specifications
» Voltage, Amperage, and
Power Consumption
» Permissible
Environmental Conditions
» Noise Level