Amiad Water Systems | 2019
TEQUATIC™ PLUS F-150 Filter, C-series Skid
18
Controls Overview
3.1.1 Manual Controls
Individual pumps and valves may be manually operated
from the home screen. This can be helpful for tuning the
system or for troubleshooting and testing devices.
To manually operate a device, touch the icon
representing the pump or valve. A pop-up dialog will
be displayed. If the device is not available for manual
operation, it will be listed as Disabled at the top of the
dialog. The device needs to be enabled before it can be
manually controlled.
If the device has speed or other rate of operation, set that value by touching the dialog to open a
numeric keypad. Type in the desired value and press Enter.
The dialog will indicate whether the On button is a momentary button or a toggle button. For a
momentary button, the device will remain active only for as long as you hold the button. For a toggle
button, the device will toggle on and off each time you touch the button.
3.1.2 Message Center
The message center will communicate any action
that is being taken by the system. The message will
change while in an event, such as Startup, and will
detail how much time is left and/or what step in the
event the system is in.
3.2 Main Settings Screen
The main settings screen provides navigation to each
of the individual setting screens. The individual setting
screens are listed below and in the subsequent sections.
•
•
•
•
•
•
•
•
•
•
•
•
