manualshive.com logo in svg

amiad TEQUATIC PLUS F-150 C Series, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
amiad TEQUATIC PLUS F-150 C Series Скачать руководство пользователя страница 19

Amiad Water Systems  | 2019

TEQUATIC™ PLUS F-150 Filter, C-series Skid

19

Controls Overview

3.2.1  Pump Settings

The pump settings can be adjusted in this screen. The 
recirculation pump is standard to the C-Series skid and 

should always be enabled. The system will send a run 
command to an external feed pump by enabling the 
feed pump. The fault delay is the time allowed between 
sending a run command and receiving feedback before 
a fault is triggered. Start and stop delays are intended 
for custom applications and should remain set to zero. 

The speed of the recirculation pump can be set here as a 
percent of the maximum available speed for the pump.

3.2.2 Valve Settings

 

This screen sets the basic parameters for any installed 
valves. Touch the valve name to select which of the 
installed valves to view the settings for. This will be 
Filtrate Valve (Manual, DP, or Flow) and Purge Valve.

• 

Enable/Disable: Sets whether the valve is available to 
the system or not.

• 

Feedback: Sets whether the valve is capable of feedback 
(open/closed/position) and whether this feedback is 
available to the system.

• 

Fault Delay: Once a valve has been signaled to close, 
the PLC will look for feedback to confirm complete 
cycling of the valve. If feedback is not received once the 
delay timer has expired a fault will be triggered.

• 

Schedule: Sets whether the valve should function on a 
timed schedule.

• 

Frequency: Sets how often (in minutes) the valve 
should be operated when Schedule is enabled.

• 

Duration: Sets how long (in seconds) the valve 
should be operated when Schedule is enabled. 

Содержание TEQUATIC PLUS F-150 C Series
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды