Amiad Water Systems | 2019
TEQUATIC™ PLUS F-150 Filter, C-series Skid
5
Introduction
1.1.3 Property and Equipment Messages
•
This equipment is not rated for hazardous locations.
•
Avoid electrical hazards and damage to equipment. Install in an area where water leakage from
vessel or piping will not damage sensitive equipment.
•
Never operate the system at pressures and temperatures in excess of the specified rating.
•
Verify all seals and internal components are properly installed.
•
To avoid damage to the system or facility, repair any leaks as soon as discovered.
•
Always open and close valves gradually. Auto-actuated valves should open and close in such a way as
to minimize water hammer.
•
Install proper safety devices in pipes and equipment carrying hot water to avoid thermal burns.
•
Verifying the filter assembly and cleaning assembly are properly installed before operating the
system.
•
To avoid damage or hammering, expel all air from the housing and piping before startup.
•
Do not start the system with filtrate line open. This will result in premature plugging of the filter
membrane.
•
Do not over-tighten the swing bolts when securing the housing cover. Do not exceed 80 ft-lb of
torque.
•
Avoid lateral loading in excess of 8 pounds to connection on the filter housing.
•
Avoid long-term exposure to ultraviolet light.
•
Ensure chemical compatibility of feedwater with materials and components of the system.
Feedwater must be compatible with CPVC and shall not contain ozone, permanganate, or other
strong oxidizing or corrosive agents.
•
Always use a hoist for lifting the filter housing lid. The lid weighs approximately 500 pounds.
