manualshive.com logo in svg

amiad TEQUATIC PLUS F-150 C Series, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
amiad TEQUATIC PLUS F-150 C Series Скачать руководство пользователя страница 24

Amiad Water Systems  | 2019

TEQUATIC™ PLUS F-150 Filter, C-series Skid

24

Controls Overview

3.3.4  Misc

• 

Units Select: This sets the operator display units 
between imperial units (U.S.) versus metric units.

• 

External Alarm: This sets whether an external alarm, 
such as a beacon lamp, is available to the system. 

• 

Housing Size: The housing size option allows all 
settings in the system to be changed to a preset value 
defined by housing size or 3 custom selections. This 
function is intended to be used by pilot or custom units 
and should not be changed.

3.4  Clock Setting Screen

This screen is used for setting the system date and time. 
Touch each entry box to open a numeric keypad pop-up 

screen to enter a new value. 

Note: 

The current software version is displayed in the 

upper right corner. This information may be requested by 
a technician.

3.5  Alarm Screen

The alarm screen provides access to the current active 

alarms, as well as the alarm log history.

The active alarm screen will show any alarms that are 

currently active on the unit. These must be cleared in 
order to continue running. The alarm log will display 
all alarms and warnings that have been triggered by 
the system. This can be helpful to identify run time of 
the unit and performance of tank level switches. If the 
alarm log is blank check that the SD card is installed in 
the HMI inside of the control panel.

All active alarms must be clear for the system to start 

and run. To clear an alarm that no longer has the trigger 
event present press the tile that shows a table with a 
check mark.

Содержание TEQUATIC PLUS F-150 C Series
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды