Ametek ta3000F, Руководство пользователя

Страница: 32 / 50

32 | Model ta3000F Gas Purity Monitor
Warm-up
The Power-up screen will display two menu items. Pressing Page will take
you to the First of 3 system setup pages (covered later). Pressing Warmup
will start the instrument in the warm-up cycle. This cycle will put the
instrument in a ready state for analysis.
After pressing Warmup the instrument will begin heating critical zones
and will perform a series of system tests. The results from these tests will
appear on the Warmup screen. The Warmup menu item will also change
to Cool. If you wish to stop the warm-up process, press the Cool key and
the instrument will return to a completely neutral state. If any errors
occur during the warm-up process, proceed to Page 45 to review error
messages.
Warmup Mode Screen
Power On Screen
Cool Mode 12:34:25
Page
Ver. 2.70
Warmup
Warmup Mode 12:35:25
Page
Module Electronics: Pass
Detector System:
Detector Temperatures:
Carrier Pressure:
Cool
WARM-UP