Ametek ta3000F, Руководство пользователя

Страница: 5 / 50

User Manual | 5
About This Document
This manual is intended as a guide for operation of the ta3000F. This
manual is notintended as a service guide and does not contain service
information. The ta3000F should only be operated by personnel who have
been properly trained in the procedures required for safe operation of the
ta3000F.
All photographs included in this manual are for example only, and
may not reflect the actual as-purchased configuration of the analyzer.
Safety Notes
Warnings, cautions, and notes contained in any document and in this
User Manual emphasize critical instructions as follows:
Improper installation, operation, or service of the analyzer may Re-
sult in permanent damage
If an electrical fire occurs on or inside the analyzer, extinguish It us-
ing class A, B, or C extinguishers. If a purifier fire occurs, Extinguish
it using sand or an extinguisher intended for class D(metal) fires
only.
Any purifiers installed in the analyzer are designed for a specific Gas
application. Do not expose these purifiers to any gas other Than the
specified application gas. If these purifiers are exposed To gases other
than the specified application gas, they could Rapidly and uncontrol-
lably overheat and could cause a fire or Permanent damage to the
purifier or the analyzer.
The analyzer must have electrical power, instrument air pressure,And
applicable gas pressure for proper operation. If Proper electrical power,
instrument air pressure, or applicable Gas pressure are not supplied,
the analyzer could be permanently Damaged and the warranty will be
void.
Operators should not attempt to repair the analyzer. Any repairs
Attempted without first consulting trace analytical customer Service
shall void the manufacturer’s warranty
!
WARNING
!
CAUTION
!
WARNING
!
WARNING
!
CAUTION