Ametek Sorensen XFR 100-28, Руководство пользователя

Страница: 20 / 99

Rear Panel Connectors and Switch
TM-F2OP-C1XN-01 1-5
Rear Panel Connectors and Switch
Use the rear panel SW1 Programming, Monitoring, and Shutdown Select
switch and the rear panel J2 Programming and Monitoring connector to
choose among several remote programming and monitoring options. See
Figure 1-2 for switches and connectors available at the rear panel. See
“Rear Panel SW1 Switch” on page 1–6 and “Rear Panel J2 Connector” on
page 1–7 for a list of switches and connector functions, and procedures
for using them.
Figure 1-2 Power Supply Rear Panel (Low voltage (7.5 V to 100 V) model shown.)
No. Description
1 Blank Subplate: Replaced if digital programming interface installed.
2 DC Output Connector: For high voltage (150 V to 600 V) models. See inset and page 2–12.
3 Fan Exhaust Vents: Do not block.
4 J10 Sense Connector. See page 2–21 for more information.
5 J2 Programming and Monitoring Connector. See page 1–7 for more information.
6 SW1 Switch. See page 1–6 for more information.
7 Chassis Ground Screw: 3/8 in. (9 mm) maximum penetration into unit.
8 AC Input Connector: See page 2–5 for more information.
1 2 3
4 5 6 7 8