Ametek Sorensen XFR 100-28, Руководство пользователя

Страница: 95 / 99

Specifications
A-8 TM-F2OP-C1XN-01
Additional Features
Remote Programming and Monitoring
Switching Frequency nominal 31 kHz (62 kHz output ripple).
Output Hold-up Time Greater than 10 ms with interruption of
AC line, for nominal AC input and
full load.
Maximum Voltage Differential
from either output to safety
ground ±600 Vdc
Insulation Resistance Input to chassis: >30 M
Ω
, with 500 Vdc;
Output to chassis: >20 M
Ω
, with
1000 Vdc.
Isolation Voltage Input to output: 1350 Vac
Remote Start/Stop and
Interlock 2.5-15 V signal or TTL-compatible input,
selectable logic. TTL input impedance: 2 k
(in series with one diode drop).
Remote Analog Programming
(Full Scale Input) Voltage and current programming inputs
(source must be isolated): 0-5 k, 0-10 k
resistances; 0-5 V, 0-10 V (default) voltage
sources. Input impedance (V and I):
approximately 100 k.
Remote Monitoring Output voltage and current: 0-5 V, 0-10 V
(default);
Output impedance (V and I): approx 221
Ω
.
Output short circuit current: approx. 50 mA.
Remote Programming and
Monitoring Accuracy 1% zero to full scale output for the default
range.
Maximum Remote Sense Line
Drop Compensation 5 V/line (Line drop is subtracted from total
voltage available at supply output.)
Optional Isolated Program
and Readback (V&I) 0-5 V (ISOL interface); input impedance:
200 k; output impedance: 221
Ω
.
Optional Digital Control RS-232, GPIB interfaces