Ametek Amrel PLA 2U, Руководство по эксплуатации

Страница: 49 / 162

M470039-01 REV-F Page 48
AC INPUT CORD
JJJJJJ
The AC input cord is the disconnect device for the electronic load. T he plug mus t be readily identifiable to the
operator. The input cord must be no longer than 3 m (9.84 feet).
The AC input cord we recommend is specified in Table 2.3, “AC Cord Specification”. If you require a special cord, call
our sa les representa tive.
WIRE SIZE TYPE OF CONDUCTOR RATINGS LENGTH (feet)
DIMENSIONS AWG
16/3 SJT 105

C 6
18/3 SJT 105

C 6
TABLE 2.3 AC CORD SPECIFICATIONS
LOAD WIRING
To select wiring for connecting the loa d to the electronic loa d, consider the following fa ctors:
•
Insula tion ra ting of the wire
•
Current ca rrying ca pa city of the wire
•
Ma ximum loa d wiring length for opera tion with sense lines
•
Noise a nd impeda nce effects of the loa d lines
CURRENT C ARRYING CAPACITY: As a minimum, loa d wiring must ha ve a current ca pa city grea ter tha n the output
current ra ting of the power supply. This ensures tha t the wiring will not be da ma ged even if the loa d is shorted. Ta ble 2.4
shows the ma ximum current rating, ba sed on 450 A/cm², f or va rious ga uges of wire ra te for 105

C operations. Opera te at
the ma ximum current ra ting re sults in a n approxima tely 30

C tempera ture rise for a wire opera ting in free a ir. Where
loa d wirin g must opera te in a rea s with elevated ambient tempera tures or b undled with other wiring, use la rger ga uges or
wiring ra ted for higher tempera ture.
TABLE 2.4 CURRENT CARRYING CAPACITY FOR LOAD WIRING
WIRE SIZE (AWG) MAXIMUM CURRENT (A)
2/0 303
1/0 247
1 192
2 155
4 97
6 61
8 36
10 21
12 16
14 10
WARNING